News

The RTU2020 is a modular, powerful and scalable controller capable of all remote automation and control applications. It is designed to communicate with any SCADA system but when combined with Experion® PKS and its radically simplified SCADA configuration with superior operator experience, it solves the most challenging remote automation requirements for the Oil & Gas industry.

The key features of the RTU2020 include:

Lowest power consumption in its category at a typical 1.8W

Temperature range -40 to 75°C (-40 to 167°F). Up to 75°C, not 70°C like other units

High reliability with well designed thermal paths

HART enabled onboard I/O onboard. No extra hardware required. Digital HART data & diagnostics are available locally for use in RTU program & remote alarming

HART IP allowing remote asset management of HART devices via Honeywell’s Field Device Manager

Efficient wiring & configuration saving installation and maintenance time

Modern, powerful CPU

Transient Suppression on every I/O channel & every communication port

RTU Builder: A powerful IEC 61131-3 programming environment

Liquids & Gas calculations in the same controller

Flexible communication options

Industry standard protocols of Modbus & DNP3 both as master and slave

Document Scope

This document provides specifications for the following RTU2020 related components:

RTU2020 Controller

RTU2020 I/O

RTU Builder

Definitions

IOTA, Input Output Termination Assembly: An assembly that holds the IOM and the connections for field wiring

IOM, Input Output Module: A device that contains most of the electronics required to perform a specific I/O function. The IOM plugs onto the IOTA.

CPM, Control Processor Module: A device that contains most of the electronics required to perform the function of an RTU controller. A CPM plugs onto an IOTA designed for the CPM. The CPM may optionally include the functionality of an IOM.

Specifications

RTU2020 Controller

The RTU2020 family has an innovative modular hardware design with processor modules that plug onto IOTAs that contain only passive devices such as cable connectors and an I/O link expansion port allowing expansion I/O modules to connect in without any further infrastructure.

1. 18-30 VDC Power Input

2. RS485 Ports (qty 2)

3. RS232 Ports(qty 2)

4. Ethernet Ports (qty 2)

5. Onboard IO (qty 28): non-redundant RTU only

6. SD Card Slot

7. Status LEDs

8. Dual I/O Link Port (on right hand side hidden in image by CPM)

Performance

With a modern dual core 667MHz processor, RTU2020 has the power for today’s applications and spare reserve to meet tomorrow’s needs.

Communication Capabilities

RTUs need to efficiently manage unreliable, low bandwidth networks. They need to communicate as a slave device to a remote SCADA system, usually over a redundant link which is on two different mediums; but also as a master to local subsystems like gas chromatographs and smart drives. RTU2020 covers all the scenarios by supporting SCADA protocols such as Modbus and DNP3 over two Ethernet ports and four serial ports.
Related product recommendations:
Honeywell 38500143-200/38500148-300
Honeywell DC-TDOB01 51307186-275
Honeywell 51404078-002
Honeywell 51450991-001
Honeywell CC-TDIL01 51308386-175
Honeywell 80363972-150
HONEYWELL DCS card 51401140-400
Honeywell SMW20A – 0025PL21SV5-XAX1XC
Honeywell 05704-A-0131
HONEYWELL 51403884-100
Honeywell 621-0024
HONEYWELL 621-9939C
Honeywell 38001847-100
More…

Emerson Factory-Certified

Emerson offers a wide inventory of factory-certified Ovation™ parts to help you minimize downtime, and maintain control system integrity.

Emerson follows a rigorous set of quality procedures for the design, manufacture, installation and testing of replacement parts in order to provide a high level of confidence that our systems will operate as intended.
Related product recommendations:
Rosemount 3900VP0210
EPRO PR6424/010-000 CON021
Emerson IC800VMCB3100
EMERSON CE5009
EPRO PR6423/002-140
EPRO PR6424/000-030
EPRO PR6423/106-OF1 & PR6423/106-0F1
GE Fanuc IC693ACC301
EPRO PR6423/10R-030 CON021
EPRO PR6423/10R-030-CN CON021
Emerson KJ3001X1-BB1
Emerson GFK-2023
More…

DETROIT — Stellantis GM Chairman John Elkann met with President Trump during a daylong trip to Washington, D.C., ahead of Trump’s inauguration on Monday to detail several upcoming U.S. investments by the transatlantic automaker.

The plans, outlined in an internal message to U.S. employees on Wednesday, include creating 1,500 jobs and reopening an Illinois plant in 2027 to build a new midsize pickup truck; building a new version of the Dodge Durango SUV at its Detroit plant (a model originally considered for production in Mexico); and providing more support to plants in Toledo, Ohio, and Kokomo, Indiana.

“John told the president that, building on our proud history in the U.S. for more than 100 years, we plan to continue that legacy, further strengthen our U.S. manufacturing footprint and provide stability for our great American workforce,” Antonio Filosa, head of North American operations at Stellantis, said in the message.

The leaders of Detroit’s “Big Three” automakers have each spoken or met with Trump. They are also among the companies that have each donated $1 million to Trump’s inauguration.

General Motors confirmed Wednesday that CEO Mary Barra also spoke with Trump about the U.S. auto industry and economy before the inauguration. The company called it a great conversation that was “friendly and productive.”

Ford Motor Chairman Bill Ford said earlier this month that he had a long phone conversation with the then-president-elect.

“We had a long conversation,” Ford said at a Detroit Auto Show event on Jan. 9. “He called me out of the blue and we had a really good conversation. He understands our industry and Ford’s importance in it. He wants to help. I think once he gets the workforce together, we might be able to have a deeper conversation.”

Some of Stellantis’ announcements, such as production of a midsize pickup in Illinois, were previously expected under a contract with the UAW. However, those announcements have been questioned over strategic decisions by former Stellantis CEO Carlos Tavares.

UAW President Sean Fein, who has campaigned for Tavares’ firing, welcomed the plans announced. The union had previously filed grievances and held anti-Stellantis rallies over layoffs and potential changes to the company’s production plans.

“This victory is a testament to the power of workers coming together to hold this multi-billion dollar company accountable. We have shown that we will do everything we can to protect the great union jobs that are the lifeblood of places like Belvidere, Detroit, Kokomo and more,” Fein said in a statement Wednesday.

Elkann, a descendant of Italy’s Agnelli family and founder of Fiat, is running the automaker as it searches for a new CEO following Tavares’ abrupt departure in December amid falling profits, plummeting market share and disagreements with the company’s board.

Stellantis’ plans for a Jeep production site in Ohio include “additional technology and strong product action for the Jeep Wrangler and Jeep Gladiator” and “more components critical to supporting the facility,” the memo showed.

Stellantis’ investment in Indiana includes production of a new four-cylinder engine, the memo showed.

“Our plans are focused on growing market share and increasing sales, and we need to make billions of dollars of investments in our people, quality products and innovative technologies in the United States,” Filosa said.

Reuters reported on Tuesday that Elkann met with Trump and several senior administration officials ahead of Trump’s inauguration, which he was invited to but did not attend.

Elkann also serves as Ferrari’s chairman. According to Reuters, Ferrari’s new Formula One driver and current driver Martin Luther King flew back to Italy to meet with seven-time world champion Lewis Hamilton before the inauguration ceremony.
Related product recommendations:
Rockwell Automation 1326AB-B740E-21
BENTLY NEVADA 102044-00-18-10-02
AMAT Model 0200-05869
Rockwell A-B 440T-MTBLE18AEBEBE
Rockwell D765-1603-4
HITACHI CPU22-02HC  33029590-2
Emerson DeltaV VE4003S5B1MV
GE F31X134EPRBEG1 FR00/0
Allen Bradley 2711T-5MCABLE2
AB-B1652
Bently Nevada 84661-46
ABB HESG 324120
Rockwell Automation 800T-QA24RG130mm
ABB HESG330184R1 ES1844c PC BOARD
GE IS200JGPAG1AAB
ABB 3HAC020729-001
ICS Triplex T8235
Bently Nevada 330906-02-12-05-05-02-05
AB 1746-OAP12
GE IS220PDIAH1AD
More……

On April 21, the 2023 new product launch conference of Sindi Digital with the theme of “Heavenly Craftsmanship Breaks the Cocoon and Creates the Future” was grandly held in Shanghai. At the conference, Sindi Digital released two new products, Tiangong CAD 2023 and Tiangong Cloud CAD 2023; at the same time, it was announced that the headquarters of Sindi Digital was officially located in Minhang, Shanghai!

At the conference, Li Rui, deputy district mayor of Minhang District, Shanghai, Wang Dong, director of Shanghai Investment Promotion Service Center, Chen Wei, former director of the Information Technology and Software Service Industry Department of the Ministry of Industry and Information Technology, Qiu Shuiping, CTO of Huawei Industrial Software and Industrial Cloud, Yang Chunhui, deputy chief engineer of the Fifth Institute of Electronics of the Ministry of Industry and Information Technology, Chen Wanling, chairman of Wuhan Kaimu Company, and other government leaders, industry senior experts, ecological partners, investors, media reporters, about 200 guests gathered together to witness the historical moment of Sindi Digital.

As important guests of this conference, Li Rui, deputy district mayor of Minhang District, Shanghai, and Wang Dong, director of Shanghai Investment Promotion Service Center, delivered speeches respectively and expressed warm congratulations on the convening of the Sindi Digital new product launch conference. He Wenjiang, CEO of Sindi Digital, announced on the spot: Sindi Digital’s headquarters landed in Minhang, Shanghai, and was officially renamed “Shanghai Sindi Digital Technology Co., Ltd.”!

Let the domestic substitution of 3D CAD become a reality!

Afterwards, Dr. Ye Xiuzi, Chairman of Sindi Digital, delivered a keynote speech entitled “Sindi Tiangong: Let the domestic substitution of 3D CAD become a reality”. He talked about the current difficulties faced by domestic 3D CAD software, and domestic substitution is imminent. To achieve true domestic substitution, enterprises call for world-class and easy-to-use domestic 3D CAD software. He confidently announced: “Tiangong CAD is the first choice for domestic substitution!” Why is Tiangong CAD the first choice for domestic substitution? Ye Xiuzi, Chairman of Sindi Digital, gave the answer: Sindi has world-class products, independent controllable capabilities, and localized services, making Tiangong CAD the first choice for domestic substitution. In the next highly anticipated session, Ye Xiuzi, Chairman of Sindi Digital, officially announced the release of new products Tiangong CAD 2023 and Tiangong Cloud CAD 2023!

Tiangong CAD 2023 new product release

Dr. Chen Zhiyang, co-founder and chief technology officer of Sindi Digital, introduced the highlights of the new product Tiangong CAD 2023 to the audience in detail. Tiangong CAD is based on the world-class 3D CAD source code acquired by Sindi Digital, and integrates Sindi Digital’s more than ten years of 3D CAD software research and development accumulation. It is a domestic 3D CAD software of international level. The product maturity and technical capabilities of Tiangong CAD 2023 are comparable to the international advanced level, meeting the R&D and design needs of industrial enterprises. The software is powerful, stable, easy to learn and use, and has strong compatibility. It can significantly improve the quality and efficiency of product design and help enterprises realize the genuineness and domestic substitution of industrial software.

Mature and stable: nearly 30 years of product iteration and development, robust and reliable large-scale software system architecture, world-class R&D team, and successful verification by tens of thousands of corporate customers around the world. Powerful functions: Benchmarking against the world’s first-class general 3D CAD software, more efficient design and modeling functions, meeting the application needs of many industries. Full compatibility: Supports the reading and editing of data in various formats, maintains the migration of associated sets of data, maintains the relevance of heterogeneous data in assembly models, and is closely integrated with upstream and downstream software.

Tiangong Cloud CAD 2023 New Product Release

Dr. Peng Wei, co-founder and chief strategy officer of Xindi Digital, unveiled the mystery of the new Tiangong Cloud CAD product and explained in detail the features and advantages of this new product to the audience. Xindi Digital started the research and development of Tiangong Cloud CAD in 2021. After more than two years of concentrated research and development, it finally launched a new industrial cloud software product. Tiangong Cloud CAD is oriented to the product R&D and design process, meeting the “end-to-end” application needs such as 3D design, data management, and collaborative sharing. Adopting a novel “end + cloud” fusion architecture and a unified cloud product data model, all data is centrally stored in the cloud, design data is safe and reliable, application scenarios are integrated, and IT management is standardized and flexible. Help enterprises achieve efficient design and smooth communication in a “cloud collaboration” environment. The nine functional features of Tiangong Cloud CAD: “end + cloud” integrated architecture, functional module APP, cloud data storage, secure and controlled data use, one-stop workbench, product data access anytime and anywhere, real-time collaboration in the design process, convenient IT operation and maintenance management, and meet various deployment requirements.

The road to domestic substitution of 3D CAD is long and arduous. At this press conference, the two new products released by Xindi Digital are undoubtedly the heavy weapon of the domestic CAD industry and the major achievements of Xindi Digital’s continuous research and development and innovation, which will further drive the upgrading and development of domestic 3D CAD software. More importantly, this marks that the domestic substitution of 3D CAD has truly become a reality, which will effectively promote the high-quality development of the manufacturing industry. Let Tiangong spread its wings, break out of the cocoon, and jointly create a new era in the domestic 3D CAD industry! In the future, Xindi Digital will continue to deepen the field of 3D CAD and make unique contributions to the rise of China’s industrial software!
Related product recommendations:
6ES5700-8MA11
6ES7952-1KL00-0AA0
AI835A 
TM2AMI2HTN
DSQC239 YB560103-CH
PDQ22 1SAJ240200R0050
07DI92 WT92 GJR5252400R4101
IC697VRD008
IC695MDL940
8C-TCNTA1
ET200B 16DO/2A
TU847 3BSE022462R1
CP800
DSCA180B
PFSA103B  3BSE002487R1
51304159-100
DS3800DLIB
3HAC14757-1
3BDH000013R1
YO-1SDA038292R1
PP877 3BSE069272R2
more……